GfS Day Alarm

GFS Day Alarm The GfS-Day Alarm is easy to install. It is a cost-effective alternative to monitor the locking of doors along escape routes. The device is plug-and-play and does not require wiring due to an optional wireless reed contact. It should be installed within a distance of up to 30 m from the wireless reed contact. It is, of course, also compatible with a standard door reed contact, but in that case, it must be wired. When the door is opened, an alarm is triggered, which is also visually perceived by the built-in alarm light in the device. Authorized persons can use the doors without triggering the alarm simply by using a key. The device's status is indicated by a red or green LED. If the door is not closed after an authorized opening, an intermittent tone sounds after 15 seconds of open time, and the green LED blinks. Once the door is closed, the red LED lights up again, the intermittent tone is turned off, and the device is armed. A permanent release of the door can also be achieved via the key switch. The corresponding pictogram "Door alarm secured" indicates that it is a monitored door. If the door is used on both sides, a button should be installed on the outside (e.g., in the lock storage, so that the storage can be exited at any time). The switch only allows authorized passage and does not trigger an alarm. This setting, as well as a permanent release, can only be made directly on the Day Alarm device by an authorized person. The elegant, anodized aluminum housing of the GfS-Day Alarm is well-suited for use in areas with public traffic.

GFS Day Alarm The GfS-Day Alarm is easy to install. It is a cost-effective alternative to monitor the locking of doors along escape routes. The device is plug-and-play and does not require wiring due to an optional wireless reed contact. It should be installed within a distance of up to 30 m from the wireless reed contact. It is also compatible with a standard door reed contact, but in that case, it must be wired. When the door is opened, an alarm is triggered, which is also visually perceived by the built-in alarm light in the device. Authorized persons can use the doors without triggering the alarm simply with a key. The device status is indicated by a red or green LED. If the door is not closed after an authorized opening, an intermittent tone sounds after 15 seconds of opening time and the green LED blinks. Once the door is closed, the red LED lights up again, the intermittent tone is turned off, and the device is armed. A permanent release of the door can also be achieved via the key switch. The corresponding pictogram "Door alarm secured" indicates that it is a monitored door. If the door is used on both sides, a button should be installed on the outside (e.g., in the lock storage, so that the storage can be exited at any time). The switch only allows authorized passage and does not trigger an alarm. This setting as well as a permanent release can only be made directly on the Day Alarm device by an authorized person. The elegant, anodized aluminum housing of the GfS-Day Alarm is well-suited for use in areas with public traffic.

LED red/green for status indicationThe alarm message is sent via cable reed contactelegant, silver-colored, anodized (E6/EV1) aluminum housing120 x 300 x 68 mm(Reed contact not included)

GFS Day Alarm The GfS-Day Alarm is easy to install. It is a cost-effective alternative to monitor the locking of doors along escape routes. The device is plug-and-play. The connection is made via the cable reed contact (930210). When the door is opened, an alarm is triggered, which is also visually perceived by the built-in alarm light in the device. Authorized persons use the doors without triggering the alarm simply with a key. The device status is indicated by a red or green LED. If the door is not closed after an authorized opening, an interval tone sounds after 15 seconds of opening time and the green LED blinks. As soon as the door is closed, the red LED lights up again, the interval tone is turned off, and the device is armed. A permanent release of the door can also be achieved via the key switch. The corresponding pictogram "Door alarm secured" indicates that it is a monitored door. If the door is used on both sides, a button must be installed on the outside (e.g., in the lock storage, so that the storage can be left at any time). The switch only allows authorized passage and does not trigger an alarm. This setting as well as a permanent release can only be made directly on the Day Alarm device by an authorized person. The elegant, anodized aluminum housing of the GfS-Day Alarm is well suited for use in areas with public traffic.

Dimensions Outside: 205 x 135 x 50 mm Inside: 185 x 105 x 50 mm

including multilingual pictogram (DE, EN, NL, SWE)

868 MHz Power supply via included batteryContact as normally closed with VdS approval. VdS Class B/Opening: G191518 VdS Class V/Closure: G190074 Color: white

GfS Wireless Repeater 990048 – Extend Your Security System's ReachEnsure uninterrupted and reliable communication for your critical security infrastructure with the GfS Wireless Repeater 990048. Designed to overcome signal limitations in complex environments, this essential accessory amplifies and extends the range of your GfS wireless security devices, such as EH-Türwächter® (door guardians) and e-Bar® panic bars. Say goodbye to dead zones and unreliable connections, and embrace enhanced safety and peace of mind.Key Features & BenefitsOptimised Signal Extension: Operating on the dedicated 868.3 MHz frequency, the GfS Wireless Repeater extends your wireless signal by an impressive 30 metres. This is crucial for maintaining robust communication between your GfS security devices and their central control units, especially in large buildings or areas with structural obstacles that can weaken wireless signals.Enhanced Reliability: Wireless security systems can be susceptible to signal loss and interference, which can compromise their effectiveness. By amplifying the signal, this repeater significantly improves the reliability and stability of your GfS security network, ensuring that alarms and status updates are transmitted without delay.Seamless Integration: Specifically engineered for GfS security solutions, this repeater ensures optimal compatibility and performance with your existing GfS EH-Türwächter® and e-Bar® systems, which are vital for securing emergency exits and escape routes in compliance with safety standards like EN 179 and EN 1125.Effortless Power Supply: The repeater is powered directly via a standard 230 V AC connection, offering a consistent and dependable power source without the need for frequent battery changes.Compact and Discreet Design: With its practical dimensions and unobtrusive appearance, the repeater can be easily integrated into various environments without drawing undue attention, making it ideal for public buildings, hospitals, schools, and commercial properties.Why Choose the GfS Wireless Repeater?In modern security setups, wireless technology offers unparalleled flexibility and ease of installation, reducing the need for extensive wiring and minimising disruption. However, the effectiveness of wireless systems hinges on strong, consistent signal integrity. The GfS Wireless Repeater directly addresses common challenges such as signal degradation due to distance, walls, or other environmental factors. It acts as a vital bridge, ensuring that every corner of your monitored area receives a clear and powerful signal, thereby enhancing the overall security and responsiveness of your GfS system. This proactive solution helps prevent potential security gaps that could arise from weak wireless connections, providing you with greater control and peace of mind over your emergency exit and access control systems.Ideal ApplicationsThe GfS Wireless Repeater 990048 is an indispensable addition for:Large commercial buildings and office complexes with extensive layouts.Multi-story facilities where wireless signals may struggle to penetrate floors and walls.Educational institutions and healthcare facilities requiring robust security across multiple zones.Any environment utilising GfS EH-Türwächter® or e-Bar® systems where signal range needs to be extended or reinforced for optimal performance.Technical SpecificationsProduct Number: 990048EAN: 4251851699226Frequency: 868.3 MHzSignal Extension: Up to 30 metresPower Supply: 230 V ACWeight: 0.045 kgDimensions (L x W x H): Not specified in detail, but the predecessor 990044 was 45 x 45 x 25 mm, suggesting a compact form factor.Important Compatibility Note: Please be aware that the GfS Wireless Repeater 990048 is not compatible with its predecessor, model 990044. Ensure you select the correct repeater for your existing GfS system to guarantee seamless functionality.

Protective cage for the strobe light on the Day Alarm device.

GfS Flush-Mounted Power Supply 24V DC 1A

GfS Wireless Receiver – The Cable-Free Control Centre for Your SecurityThe GfS Wireless Receiver (Article Number 990043) is an essential component for modern security systems that rely on wireless signal transmission. Developed by GfS – Gesellschaft für Sicherheitstechnik mbH, a leading European manufacturer of escape route security systems and door technology components with over 40 years of experience, this device stands for quality and reliability. It enables seamless integration into existing alarm and building management systems, offering a flexible solution for monitoring escape and rescue routes, especially where extensive cabling is difficult or undesirable.Unleash the Power of Wireless ConnectivitySay goodbye to complex and costly wiring! This wireless receiver revolutionises installation by enabling seamless wireless signal transmission, often eliminating the need for additional cable laying. This is particularly advantageous for retrofitting existing structures or in buildings with intricate layouts where traditional wired systems pose significant challenges.Robust Reliability for Demanding EnvironmentsEngineered for durability, the receiver's IP65-rated housing ensures complete dust-tightness and protection against jet water. This robust design guarantees reliable performance and an extended lifespan, even in challenging environments such as industrial facilities, outdoor areas, or within general building technology. This resilience addresses common pain points associated with aging or vulnerable security system receivers, ensuring consistent operation where it matters most.Versatile Integration for Comprehensive ControlEquipped with two potential-free relay outputs (2-channel), the wireless receiver can control external signal generators with 24V AC 1A or 30V DC 1A. Potential-free contacts are ideal for the secure transmission of states between electrical devices, as they galvanically isolate the circuits, preventing interference or damage. This enables seamless integration into existing alarm systems and building management technology, offering unparalleled flexibility for your security infrastructure.Proven Wireless Technology for Uninterrupted SecurityOperating on a frequency of 868.30 MHz and utilising the reliable EasyWave protocol, this receiver ensures secure and stable wireless communication. The 868 MHz frequency offers a high range and low susceptibility to interference, as it is reserved for low-power applications and is not disrupted by other wireless standards like Wi-Fi or Bluetooth. The EasyWave protocol is renowned for its secure and stable wireless communication, even being employed in emergency call systems. This robust communication minimises the risk of signal loss or interference, a common concern with wireless systems.Compact Design for Discreet InstallationWith compact dimensions of just 70 x 62 x 35 mm and a lightweight design of 0.057 kg, the wireless receiver can be mounted discreetly and space-efficiently, blending seamlessly into any environment.Optimal Application in Critical AreasThis wireless receiver is the ideal solution for a wide range of applications, particularly in security technology and building automation. It can receive signals from GfS door guardians or wireless reed contacts and forward them to external alarm systems, sirens, strobe lights, or directly into building management systems. This provides a cost-effective and flexible way to secure escape routes and transmit alarms wirelessly, eliminating the need for complex electrical planning.Technical Details at a Glance:Frequency: 868.30 MHz with EasyWave ProtocolOutputs: 2 potential-free relay outputs / 2-channelProtection Class: IP 65 (dust-tight and jet-water protected)Dimensions (L x W x H): 70 x 62 x 35 mmWeight: 0.057 kgControl: External signal generators (24V AC 1A / 30V DC 1A)

Type A (Closer) Opening Monitoring with Tamper Line Switching Capacity 42V max. 0.5A Color White

Type A (Closer) Opening Monitoringwith Tamper Line Switching Capacity 42V max. 0.5A Color White

and door terminal

replacement keys for profile half-cylinder (1 set = 2 pieces) Please always specify the desired locking in the comment field! If not known, you can also send us a picture of the cylinder.

Sign: "Door Alarmed"  self-adhesive film