GfS e-Bar

GFS E-BAR - THE INNOVATIVE PUSH BAR WITH INTEGRATED ALARM AND MONITORING FUNCTION.

The timelessly elegant GfS e-Bar is a panic hardware made of stainless steel. It is delivered in three different lengths, which can be individually shortened on site to optimally fit any door.

The push bar is mounted across the entire door width and thus complies with legal regulations that require installation over at least 60% of the door width. The innovation of the GfS e-Bar lies in its dual function. The control and alarm function for the emergency exit is already integrated into the push bar. This makes additional emergency exit security systems largely unnecessary. To increase the threshold against unauthorized use of the panic door, the GfS e-Bar operates with a two-stage alarm (pre-alarm and main alarm).

Direkt zur GfS e-Bar®

GfS e-Bar mechanical with potential-free contact

1 x GfS e-Bar push bar with additional contact Evaluation of the position status of the panic door shortenable by 160 mm incl. pictogram with usage instructions

Show details

Prod.-Nr.: 700713

Variants from €864.89*

€882.15*

Length: 1130 mm

GfS e-Bar mechatronic with battery or external power supply

1 x GfS e-Bar can be used with 9 V battery or power supply including battery monitoring (checks voltage every 10 hours) power-saving mode when using battery connection cable required for mains operation (Art.-Nr.: 770719) shortenable by 180 mm incl. stickers for the display and key switch incl. pictogram with usage instructions

Show details

Prod.-Nr.: 700730

€1,493.45*

Length: 970 mm

GfS e-Bar mechatronic with external power supply and emergency switch

1 x GfS e-Bar integrated alarm and monitoring function with external connection options integrated emergency switch EN 13637 (2 opening contacts) mains voltage (10-30 V DC) (connection cable required: Art.-Nr.: 770719) shortenable by 180 mm incl. pictogram with usage instructions

Show details

Prod.-Nr.: 700740

€1,660.88*

Length: 970 mm

LATCH

The panic door is in a secured status, indicated by a white backlit display (when battery operated) with the inscription "Emergency Exit Alarm Secured". When the battery mode switches to mains voltage, the display is permanently backlit in green.

PRE-ALARM

When slight pressure is applied to the GfS e-Bar, an optical (display pulses red) and an acoustic pre-alarm (95 dB/1m) is activated, which deactivates once the GfS e-Bar is released. The door remains closed.

MAIN ALARM

When the GfS e-Bar is fully pressed, passing through the emergency exit is possible. This triggers the optical (flashing green display) and the acoustic main alarm (95 dB/1 m).

This can only be acknowledged by an authorized person via the integrated key switch. An automatic alarm shutdown after 3 minutes can be set.

SINGLE RELEASE

Authorized persons can pass through the door without triggering an alarm by using a pulse input on the integrated key switch of the GfS e-Bar or via an external pulse generator.

If the door remains accidentally open after passing, a "door-open-too-long alarm" will sound after 10 seconds (optional when using a Reed contact).

PERMANENT RELEASE

By using an integrated key switch or via pulse input, the GfS e-Bar can be set to a permanent release position. The door can be accessed without triggering an alarm. When on mains power, the display pulses green. In battery mode, the LEDs briefly light up every 15 seconds.

FAQ