Variants

usable on the right/left

approx. 30 m range in long-glow (fluorescent) coating

GFS Exit Control PUR The GfS Exit Control is mounted under the door handle in such a way that it prevents the handle from being operated, thus securing the door. The door can only be opened if the GfS Exit Control is first turned to the side. It then locks into its angled position and releases the handle's operating path. At the same time, a loud alarm sounds. The door can be opened in case of emergency, but the alarm signal alerts to unauthorized use. The responsible caretaker, technician, etc. can only reset the door guard with a key, thereby stopping the alarm. The door guard can be used for right or left doors. Pictograms on the door guard and on the door indicate the direction in which it must be swiveled. The swivel direction is set by the customer using a dowel pin (included in the delivery). The threshold under the door handle is active. The door handle is secured. When swiveled to the right or left, the door guard locks firmly and releases the operating path for the handle. At the same time, an alarm sounds. Authorized persons do not use the handle,but open the latch with the key,to pass through the door without triggering the alarm. At 180° swivel, the door guard locks in place. The permanent release can be performed without alarm using the device key and the door can be used normally. The wireless transmission is used when signal transmission is needed, but wiring is not desired, too complex, or impossible. The Exit Control is used on double-leaf doors to secure the inactive leaf. It can also be used on window handles.

for external fences with local alarmDoor guard with PHZMoisture-protected versionwith battery monitoring

for mounting on glass frame doors usable on right/left for short door plates How to measure: Distance from the center of the handle pin to the bottom edge of the door plate (less than 135 mm)

phosphorescent

for mounting on glass frame doors usable for right/left for long door plates (20.5 cm) or oval rosettes How to measure: Distance from the center of the handle pin to the bottom edge of the door plate (greater than 135 mm)

GFS SWING DOOR GUARD The door guard is mounted under the door handle in such a way that it prevents operation and thus secures the door handle or the bolt. The door can only be opened if the door guard is first swung to the side. It then locks in its inclined position and releases the handle's operating path. At the same time, a loud acoustic alarm sounds. This means: The door can be opened in an emergency, but the alarm signal alerts to unauthorized use. The responsible janitor, technician, etc. can only reset the door guard with a key and thus end the alarm. The door guard can be used for right or left doors. Pictograms on the door guard and on the door indicate the direction in which it must be swung. The swing direction is set by the customer using a notch pin (included in the delivery). The threshold under the door handle is active. The door handle is secured. When swung to the right or left, the door guard locks firmly and releases the operating path for the handle. At the same time, an alarm sounds. Authorized persons do not use the handle,but open the lock latch with the key,to open the door without triggering the alarm. At 180° swing, the door guard locksin. The permanent release can be done without alarm using the device key and the door can be used normally. The wireless transmission is used when signal transmission is needed, but wiring is not desired, too complex or impossible. The Exit Control is used on double-leaf doors to secure the inactive leaf. It can also be used on window handles.

Release mechanism with spring and notch pin.