GfS e-Bar

1 x GfS e-Bar integrated alarm and monitoring function with external connection options integrated emergency switch EN 13637 (2 opening contacts) mains voltage (10-30 V DC) (connection cable required: Art.-Nr.: 770719) shortenable by 180 mm incl. pictogram with usage instructions

1 x GfS e-Bar can be used with 9 V battery or power supply including battery monitoring (checks voltage every 10 hours) power-saving mode when using battery connection cable required for mains operation (Art.-Nr.: 770719) shortenable by 180 mm incl. stickers for the display and key switch incl. pictogram with usage instructions

1 x GfS e-Bar push bar with additional contact Evaluation of the panic door position shortenable by 180 mm incl. pictogram with usage instructions

1 x GfS e-Bar pure push bar without additional contacts shortenable by 160 mm incl. pictogram with usage instructions

GfS e-Bar Special Length

Additional board for retrofitting

Ausgangsspannung: 1x 12 V/DC ,max. 1ASchutzart: IP20 Abmessungen: LxBxT 110x215x70 mm

GfS e-Bar Surcharge for Custom Length Adjustment

Cutting tool for the e-Bar for shortening the GfS e-Bar

GfS Wireless Repeater 990048 – Extend Your Security System's ReachEnsure uninterrupted and reliable communication for your critical security infrastructure with the GfS Wireless Repeater 990048. Designed to overcome signal limitations in complex environments, this essential accessory amplifies and extends the range of your GfS wireless security devices, such as EH-Türwächter® (door guardians) and e-Bar® panic bars. Say goodbye to dead zones and unreliable connections, and embrace enhanced safety and peace of mind.Key Features & BenefitsOptimised Signal Extension: Operating on the dedicated 868.3 MHz frequency, the GfS Wireless Repeater extends your wireless signal by an impressive 30 metres. This is crucial for maintaining robust communication between your GfS security devices and their central control units, especially in large buildings or areas with structural obstacles that can weaken wireless signals.Enhanced Reliability: Wireless security systems can be susceptible to signal loss and interference, which can compromise their effectiveness. By amplifying the signal, this repeater significantly improves the reliability and stability of your GfS security network, ensuring that alarms and status updates are transmitted without delay.Seamless Integration: Specifically engineered for GfS security solutions, this repeater ensures optimal compatibility and performance with your existing GfS EH-Türwächter® and e-Bar® systems, which are vital for securing emergency exits and escape routes in compliance with safety standards like EN 179 and EN 1125.Effortless Power Supply: The repeater is powered directly via a standard 230 V AC connection, offering a consistent and dependable power source without the need for frequent battery changes.Compact and Discreet Design: With its practical dimensions and unobtrusive appearance, the repeater can be easily integrated into various environments without drawing undue attention, making it ideal for public buildings, hospitals, schools, and commercial properties.Why Choose the GfS Wireless Repeater?In modern security setups, wireless technology offers unparalleled flexibility and ease of installation, reducing the need for extensive wiring and minimising disruption. However, the effectiveness of wireless systems hinges on strong, consistent signal integrity. The GfS Wireless Repeater directly addresses common challenges such as signal degradation due to distance, walls, or other environmental factors. It acts as a vital bridge, ensuring that every corner of your monitored area receives a clear and powerful signal, thereby enhancing the overall security and responsiveness of your GfS system. This proactive solution helps prevent potential security gaps that could arise from weak wireless connections, providing you with greater control and peace of mind over your emergency exit and access control systems.Ideal ApplicationsThe GfS Wireless Repeater 990048 is an indispensable addition for:Large commercial buildings and office complexes with extensive layouts.Multi-story facilities where wireless signals may struggle to penetrate floors and walls.Educational institutions and healthcare facilities requiring robust security across multiple zones.Any environment utilising GfS EH-Türwächter® or e-Bar® systems where signal range needs to be extended or reinforced for optimal performance.Technical SpecificationsProduct Number: 990048EAN: 4251851699226Frequency: 868.3 MHzSignal Extension: Up to 30 metresPower Supply: 230 V ACWeight: 0.045 kgDimensions (L x W x H): Not specified in detail, but the predecessor 990044 was 45 x 45 x 25 mm, suggesting a compact form factor.Important Compatibility Note: Please be aware that the GfS Wireless Repeater 990048 is not compatible with its predecessor, model 990044. Ensure you select the correct repeater for your existing GfS system to guarantee seamless functionality.

Cover plate for screw holes when mounting on solid doors for screw holes when mounting on wooden doors, incl. 4 screws

Knob as a grip aid for opening the door

Input voltage: 230 V/AC +/- 10%Nominal frequency: 48-63 HzOutput voltage: 12 V/DCOutput current: 500 mANominal power: 6 W

Installation box: 25 x 480 x 17 mmLength of the spiral: 360 mmInner diameter of the spiral: 10.8 mmwith square end piecescompletely made of stainless steel

Outer diameter: 5.6 mmone end bluntly cut,other end 5 cm free with ferrules assembled

and door terminal

Installation box: 25 x 260 x 17 mm Length of the spiral: 260 mm Inner diameter of the spiral: 10.8 mm with square end pieces completely made of stainless steel

zum Anbringen auf der Gegenseitebei Montage auf Glasflächen

replacement keys for profile half-cylinder (1 set = 2 pieces) Please always specify the desired locking in the comment field! If not known, you can also send us a picture of the cylinder.

Length of the spiral: 370 mmInner diameter of the spiral: 10.8 mmwith square end piecescompletely made of stainless steel

Length of the spiral: 155 mmInner diameter of the spiral: 10.8 mmwith round end piecescompletely made of stainless steel

Length of the spiral: 155 mmInner diameter of the spiral: 10.8 mmwith square end piecescompletely made of stainless steel

GfS e-Bar Replacement Sticker EMERGENCY EXIT ALARM SECURED, 298 x 28 mm

Replacement sticker set for the key switch of the e-Bar.DIN left, DIN right as a set

IN CASE OF EMERGENCY PRESS TO OPENfor attachment on the door