GfS Exit Control 179/1125

GfS SMARTDisplay for up to 8 devices 7-inch touch color display Graphical user interface User-supportive communication via display Door list with status display BUS for bi-directional communication Analog wiring with cable connection box for star wiring Integrated horn Housing for wall mounting (D x W x H) 43 x 230 x 153 mm

GFS EH-Exit Control The GfS Exit Control 179/1125 secures the emergency exit and allows it to be opened with just a single hand movement. In the locked position, the GfS Exit Control 179/1125 secures the door handle; the door can be accessed in an emergency with a single opening movement. By pressing down the door handle, the GfS Exit Control 179/1125 moves vertically downward and releases the handle. At the same time, a continuous signal sounds. The continuous alarm can only be deactivated with the help of a key, and the door guard can be reset to its original position. For continuous passage operation, the system's permanent release is possible using the device key. The door can also be accessed without triggering an alarm using the key through the change function of the door lock. This means: The door can be opened with just one hand movement in case of danger, but the alarm signal alerts to unauthorized use. The threshold under the door handle is active.In an emergency, the door can be openedwith a single hand movement. When the door handle is pressed down,the Exit Control 179/1125 automatically moves downward. Theemergency exit door can now be accessed. Acontinuous alarm sounds, which can only be deactivatedby an authorized person using the device key. Authorized persons do not use the handle,but open the lock latch with the key,to access the door without triggering an alarm. With the device key, the door guard can bemoved downward into apermanent release position without triggering an alarm. In thisposition, the door can be accessed normally, e.g., for a longer goods transport. As soon as the door handle triggers the pre-alarm,an alarm is triggered. Releasing the handlesilences the alarm. However, if the userpresses the handle all the way down, itirreversibly triggers the main alarm and thedoor guard releases the handle. The basic functions of the EH wirelessdoor guard are the same as already described.It is used when the signal needs to be forwarded to an externalalarm system, whether at theporter's lodge, in the nurse's station, or the janitor's office.

GFS EH-Exit Control The GfS Exit Control 179/1125 secures the emergency exit and allows it to be opened with just one single movement. In the locked position, the GfS Exit Control 179/1125 secures the door handle; the door can be accessed in an emergency with a single opening movement. By pressing down the door handle, the GfS Exit Control 179/1125 moves vertically downward and releases the handle. At the same time, a continuous signal sounds. The continuous alarm can only be deactivated with the help of a key, and the door guard can be reset to its original position. For continuous passage, the system's permanent release can be activated using the device key. The door can also be accessed without triggering the alarm using the key through the door lock's change function. This means: The door can be opened with just one movement in case of danger, but the alarm signal alerts to unauthorized use. The threshold under the door handle is active.In an emergency, the door can be openedwith one movement. When the door handle is pressed down,the Exit Control 179/1125 automatically moves downward. Theemergency exit door can now be accessed. Acontinuous alarm sounds, which can only be deactivatedby an authorized person using the device key. Authorized persons do not use the handle,but open the lock latch with the keyto access the door without triggering the alarm. With the device key, the door guard can bemoved downward to a permanent release positionwithout triggering the alarm. In thisposition, the door can be accessed normally, e.g., for a longer goods transport. As soon as the door handle triggers the pre-alarm,an alarm is triggered. Releasing the handlesilences the alarm. However, if the userpresses the handle all the way down, itirreversibly triggers the main alarm and thedoor guard releases the handle. The basic functions of the EH wirelessdoor guard are the same as already described.It is used when the signal needs to be forwardedto an external alarm system, whether at thegatekeeper, nurse's station, or janitor's office.

GFS Exit Control The GfS Exit Control 179/1125 secures the emergency exit and allows it to be opened with just one single motion. In the locked position, the GfS Exit Control 179/1125 secures the door handle; the door can be accessed in an emergency with a single opening movement. By pressing down the door handle, the GfS Exit Control 179/1125 moves vertically downwards and frees the handle. At the same time, a continuous signal sounds. The continuous alarm can only be deactivated with the help of a key, and the door guard can be reset to its original position. For continuous passage operation, the permanent release of the system is possible with the device key. The individual passage of the door can also be carried out without triggering an alarm using the key via the change function of the door lock. This means: The door can be opened with just one motion in case of danger, but the alarm signal alerts to unauthorized use. The threshold under the door handle is active.In an emergency, the door can be openedwith one motion. When pressing down the door handle,the Exit Control 179/1125 automatically moves down. Theemergency exit door can now be accessed. Acontinuous alarm sounds, which can only be deactivatedby an authorized person using the device key. Authorized persons do not use the handle,but open the lock latch with the key,to access the door without triggering an alarm. With the device key, the door guard can bemoved down to a permanent release positionwithout an alarm. In this position, the door can benormally accessed, e.g., for a longer goods transport. As soon as the door handle presses down the pre-alarm,an alarm is triggered. Releasing the handlesilences the alarm again. However, if the userpresses the handle all the way down, itirreversibly triggers the main alarm and thedoor guard releases the handle. The basic functions of the EH-RadioDoor Guard are the same as already described.It is used when the signal needs to be forwarded to an externalalarm system, whether at theporter, nurse, or janitor's office.

(ähnlich RAL 6029), PHZ eingebaut,mit Voralarm bei Antippen und für Panikstangenmit 2 Schlüsseln und Befestigungsmaterialinkl. 2 St. Piktogrammen

ready for operation installedanodized (E6/EV1) aluminum housing95 dB/1m (optionally switchable off after 3 min.)potential-free contact (30 V, 1 A)1.5 m power plug

Seamless Integration for Enhanced Building SafetyElevate your building's safety infrastructure with the GfS Wireless BUS Interface (Art.-Nr. 990045). This essential accessory facilitates the seamless integration of your GfS EH-Türwächter® emergency exit door alarms into a centralised Master BUS system. Manufactured by GfS, a leading European producer of escape route security systems with over 40 years of experience, this interface embodies quality and innovation, ensuring reliable performance when it matters most. GfS EH-Türwächter systems are designed to secure emergency exits, triggering a loud alarm upon unauthorised use, which can then be centrally monitored via this interface.The Power of BUS Systems in Modern SecurityModern security technology increasingly relies on BUS systems, which enable intelligent networking of devices by separating power and data flow. This intelligent approach enhances security by allowing all components to communicate, facilitating central monitoring and control. BUS systems offer significant advantages, including reduced installation and maintenance costs due to fewer cables, and the ability to ascertain the status of every bus participant from a single location. Smart buildings, built upon such integrated systems, represent a crucial trend in optimising efficiency, sustainability, and user-friendliness.Key Benefits at a Glance:Comprehensive Scalability: The interface supports ring-shaped wiring for up to 255 door alarms, offering exceptional flexibility and scalability for buildings and facilities of all sizes, from small to very large. This allows for easy expansion of your security infrastructure as needs evolve.Efficient Signal Transmission: Equipped with two dedicated inputs for "permanently open" and "alarm" messages, this interface ensures precise and rapid transmission of critical status information to your BUS system. This real-time data sharing is crucial for prompt emergency response.Simplified Installation: Power is supplied directly via the bus line, eliminating the need for additional power supplies and significantly simplifying the installation process. This reduces complexity and installation time.Robust Construction: Designed for installation in flush-mounted or surface-mounted switch boxes, the interface is delivered in a durable HENSEL D9120 surface-mounted enclosure. The enclosure's IP65/IP55 protection rating ensures high resistance against dust and jet water, making it suitable for demanding environments such as industrial facilities or public buildings.Compact Dimensions: With a circuit board measuring approximately 48 x 44 mm, the interface is exceptionally compact, allowing for discreet integration into existing installations. Pre-drilled holes are provided for secure fastening within a HENSEL D9120 surface-mounted enclosure.Lightweight Design: Weighing only approximately 0.15 kg, the interface adds minimal weight to your overall security installation.Technical Details and Applications:The GfS Wireless BUS Interface is specifically developed for integrating the proven GfS EH-Türwächter® into existing BUS security systems. It extends the functionality of your door alarms by centralising their status messages, enabling comprehensive monitoring and control of your escape route security. GfS is renowned for its high-quality and innovative products in escape route security.The IP65 rating signifies complete dust-tightness and protection against jet water from all directions. IP55 indicates protection against dust ingress (small amounts of dust may enter without impairing function) and jet water from all directions. These robust characteristics make the interface ideal for environments where dust or moisture may be present, such as industrial plants, public buildings, or even outdoor areas, provided the enclosure is adequately protected.Invest in Future-Proof Security:By choosing the GfS Wireless BUS Interface, you are investing in a future-proof solution that not only enhances the efficiency of your security systems but also simplifies maintenance and reduces operating costs. Integration into a BUS system allows for flexible adaptation to future requirements and easy expansion of your security infrastructure. Smart buildings and the integration of security systems are a growing trend, enabling proactive building management through improved connectivity and data analysis.

Small door wedge as departure protection, 110 x 110 x 76 mm INOX, prepared for lock-side adhesive mounting

Operating voltage: 9 - 28 VCurrent consumption: 9 - 35 mA IP 54 approx. 95 dB/1 m with volume control LED technology

combination spacer block 80 mm for the Exit Control 179/1125 50 mm cranked mounting plate 170 x 175 mm 30 mm spacer for DIN left doors

Sirenen, Zutrittskontrollanlagen oder Elektrofallenschlössern Betriebsspannung: 230 V/AC +/- 10%, 50HzAusgangsspannung: 1x 12 VD/C, max. 1ASchutzart: IP20Abm.: (B x H x T) 110 x 190 x 70 mm

combination spacer block 60 mm for the Exit Control 179/1125 30 mm cranked mounting plate 170 x 175 mm 30 mm spacer for DIN left doors

Additional cost for RAL coating - RAL: *** excluded from exchange

GfS Wireless Repeater 990048 – Extend Your Security System's ReachEnsure uninterrupted and reliable communication for your critical security infrastructure with the GfS Wireless Repeater 990048. Designed to overcome signal limitations in complex environments, this essential accessory amplifies and extends the range of your GfS wireless security devices, such as EH-Türwächter® (door guardians) and e-Bar® panic bars. Say goodbye to dead zones and unreliable connections, and embrace enhanced safety and peace of mind.Key Features & BenefitsOptimised Signal Extension: Operating on the dedicated 868.3 MHz frequency, the GfS Wireless Repeater extends your wireless signal by an impressive 30 metres. This is crucial for maintaining robust communication between your GfS security devices and their central control units, especially in large buildings or areas with structural obstacles that can weaken wireless signals.Enhanced Reliability: Wireless security systems can be susceptible to signal loss and interference, which can compromise their effectiveness. By amplifying the signal, this repeater significantly improves the reliability and stability of your GfS security network, ensuring that alarms and status updates are transmitted without delay.Seamless Integration: Specifically engineered for GfS security solutions, this repeater ensures optimal compatibility and performance with your existing GfS EH-Türwächter® and e-Bar® systems, which are vital for securing emergency exits and escape routes in compliance with safety standards like EN 179 and EN 1125.Effortless Power Supply: The repeater is powered directly via a standard 230 V AC connection, offering a consistent and dependable power source without the need for frequent battery changes.Compact and Discreet Design: With its practical dimensions and unobtrusive appearance, the repeater can be easily integrated into various environments without drawing undue attention, making it ideal for public buildings, hospitals, schools, and commercial properties.Why Choose the GfS Wireless Repeater?In modern security setups, wireless technology offers unparalleled flexibility and ease of installation, reducing the need for extensive wiring and minimising disruption. However, the effectiveness of wireless systems hinges on strong, consistent signal integrity. The GfS Wireless Repeater directly addresses common challenges such as signal degradation due to distance, walls, or other environmental factors. It acts as a vital bridge, ensuring that every corner of your monitored area receives a clear and powerful signal, thereby enhancing the overall security and responsiveness of your GfS system. This proactive solution helps prevent potential security gaps that could arise from weak wireless connections, providing you with greater control and peace of mind over your emergency exit and access control systems.Ideal ApplicationsThe GfS Wireless Repeater 990048 is an indispensable addition for:Large commercial buildings and office complexes with extensive layouts.Multi-story facilities where wireless signals may struggle to penetrate floors and walls.Educational institutions and healthcare facilities requiring robust security across multiple zones.Any environment utilising GfS EH-Türwächter® or e-Bar® systems where signal range needs to be extended or reinforced for optimal performance.Technical SpecificationsProduct Number: 990048EAN: 4251851699226Frequency: 868.3 MHzSignal Extension: Up to 30 metresPower Supply: 230 V ACWeight: 0.045 kgDimensions (L x W x H): Not specified in detail, but the predecessor 990044 was 45 x 45 x 25 mm, suggesting a compact form factor.Important Compatibility Note: Please be aware that the GfS Wireless Repeater 990048 is not compatible with its predecessor, model 990044. Ensure you select the correct repeater for your existing GfS system to guarantee seamless functionality.

mit integriertem Richtungspfeil grünes Einschubteil

rounded corners and rubberized back incl. mounting material 200 x 200 x 4 mm RAL 6029

Umrüstung des GfS Türwächters zum Schutz gegen Strahlwasser aus beliebigen Richtungen (nur die Umrüstung, der Türwächter muss separat bestellt werden)

100% ED, 250 mA

Base plate for the Exit Control 179/1125 painted in RAL 6029

Base plate for the Exit Control 179/1125 with battery compartment

GfS Wireless Receiver – The Cable-Free Control Centre for Your SecurityThe GfS Wireless Receiver (Article Number 990043) is an essential component for modern security systems that rely on wireless signal transmission. Developed by GfS – Gesellschaft für Sicherheitstechnik mbH, a leading European manufacturer of escape route security systems and door technology components with over 40 years of experience, this device stands for quality and reliability. It enables seamless integration into existing alarm and building management systems, offering a flexible solution for monitoring escape and rescue routes, especially where extensive cabling is difficult or undesirable.Unleash the Power of Wireless ConnectivitySay goodbye to complex and costly wiring! This wireless receiver revolutionises installation by enabling seamless wireless signal transmission, often eliminating the need for additional cable laying. This is particularly advantageous for retrofitting existing structures or in buildings with intricate layouts where traditional wired systems pose significant challenges.Robust Reliability for Demanding EnvironmentsEngineered for durability, the receiver's IP65-rated housing ensures complete dust-tightness and protection against jet water. This robust design guarantees reliable performance and an extended lifespan, even in challenging environments such as industrial facilities, outdoor areas, or within general building technology. This resilience addresses common pain points associated with aging or vulnerable security system receivers, ensuring consistent operation where it matters most.Versatile Integration for Comprehensive ControlEquipped with two potential-free relay outputs (2-channel), the wireless receiver can control external signal generators with 24V AC 1A or 30V DC 1A. Potential-free contacts are ideal for the secure transmission of states between electrical devices, as they galvanically isolate the circuits, preventing interference or damage. This enables seamless integration into existing alarm systems and building management technology, offering unparalleled flexibility for your security infrastructure.Proven Wireless Technology for Uninterrupted SecurityOperating on a frequency of 868.30 MHz and utilising the reliable EasyWave protocol, this receiver ensures secure and stable wireless communication. The 868 MHz frequency offers a high range and low susceptibility to interference, as it is reserved for low-power applications and is not disrupted by other wireless standards like Wi-Fi or Bluetooth. The EasyWave protocol is renowned for its secure and stable wireless communication, even being employed in emergency call systems. This robust communication minimises the risk of signal loss or interference, a common concern with wireless systems.Compact Design for Discreet InstallationWith compact dimensions of just 70 x 62 x 35 mm and a lightweight design of 0.057 kg, the wireless receiver can be mounted discreetly and space-efficiently, blending seamlessly into any environment.Optimal Application in Critical AreasThis wireless receiver is the ideal solution for a wide range of applications, particularly in security technology and building automation. It can receive signals from GfS door guardians or wireless reed contacts and forward them to external alarm systems, sirens, strobe lights, or directly into building management systems. This provides a cost-effective and flexible way to secure escape routes and transmit alarms wirelessly, eliminating the need for complex electrical planning.Technical Details at a Glance:Frequency: 868.30 MHz with EasyWave ProtocolOutputs: 2 potential-free relay outputs / 2-channelProtection Class: IP 65 (dust-tight and jet-water protected)Dimensions (L x W x H): 70 x 62 x 35 mmWeight: 0.057 kgControl: External signal generators (24V AC 1A / 30V DC 1A)

For ring-shaped wiring of up to 255 door guards.With 2 inputs for each permanent open and alarm message.For installation in a flush-mounted or surface-mounted switch box.Dimensions (W x H x D) approx. 48 x 44 mm with holes for mounting in a HENSEL D9120 surface-mounted boxPower supply via the bus line.

for mounting on glass frame doors usable for right/left max. leg length 275mm max. leg width 210mm This custom-made product is excluded from exchange. please specify desired dimensions in the shopping cart as a comment

bent mounting plate for Exit Control 179/1125 on glass frame doors sabotage-proof with mounting holes 170 x 175 mm 50 mm offset for DIN left doors

52 x 175 x 50 mm (W x H x D)

52 x 175 x 60 mm (W x H x D)

bent mounting plate for Exit Control 179/1125 on glass frame doors tamper-proof with mounting holes 170 x 175 mm 30 mm offset for DIN right-hand doors in long-lasting luminous

Spacer including cover caps for mounting the Exit Control 179/1125s Spacer 30 mm including mounting material for mounting on solid or glass doors as well as on panic bars

Including mounting material