Emergency Exit Solutions
Art.-Nr.:
990001
GfS Exit Control 179/1125 Basic photoluminescent
Product weight:
1.4 kg
GFS EH-DOOR GUARD
The patented GfS Exit Control 179/1125 secures the emergency exit and allows it to be opened with just one single hand movement.
In the locked position, the GfS Exit Control 179/1125 secures the door handle; the door can be opened in an emergency with a single opening movement. By pressing down the door handle, the GfS Exit Control 179/1125 moves vertically downwards and releases the handle. At the same time, a continuous signal sounds. The continuous alarm can only be deactivated with the help of a key, and the door guard can be reset to its original position. For continuous passage operation, the system's permanent release is possible with the device key. The door can also be opened without triggering the alarm using the key via the change function of the door lock. This means: The door can be opened with just one hand movement in case of danger, but the alarm signal draws attention to unauthorized use.
![]() The threshold under the door handle is active. In an emergency, the door can be opened with one hand movement. | ![]() When the door handle is pressed down, the Exit Control 179/1125 automatically moves downwards. The emergency exit door can now be opened. A continuous alarm sounds, which can only be deactivated by an authorized person using the device key. | ![]() Authorized persons do not use the handle, but open the lock latch with the key to pass through the door without triggering the alarm. | |
![]() With the device key, the door guard can be moved downwards without triggering the alarm into a permanent release position. In this position, the door can be used normally, e.g., for a longer goods transport. | ![]() As soon as the door handle triggers the pre-alarm, an alarm is triggered. Releasing the handle silences the alarm again. However, if the user presses the handle all the way down, it irreversibly triggers the main alarm and the door guard releases the handle. | ![]() The basic functions of the EH wireless door guard are the same as already described. It is used when the signal needs to be forwarded to an external alarm system, whether at the gatekeeper, in the nurse's or janitor's office. |
- GfS EH-Türwächter
- 9 V-Batterie
- 2 Schlüssel passend zum Profilhalbzylinder
- 1 großes Piktogramm
- 3 Schrauben zur Befestigung
Skip product gallery
Kunden kauften auch
GfS Exit Control 179 mounting plate 170x175 mm, RAL 6029
€65.21*
Prod.-Nr.: 991470
Mounting plate for Door Retainer doors (Exit Control 179/1125 and Swing Door Guard) for gluing
€65.21*
Prod.-Nr.: 901670
Mounting plate (long) for GfS Exit Control 179/1125 on glass frame doors, RAL 6029
€72.35*
Prod.-Nr.: 991770
Spacer for Exit Control 179/1125 30 mm RAL 6029
€75.33*
Prod.-Nr.: 901455
combination spacer block 60mm for Exit Control 179/1125 on panic bars left RAL 6029
€153.27*
Prod.-Nr.: 901860
combination spacer block 80 mm for Exit Control 179/1125 on panic bars DIN left RAL 6029
€157.44*
Prod.-Nr.: 901862
Combined device siren and flashing light in white housing and red dome
€157.56*
Prod.-Nr.: 771527
bent mounting plate for Exit Control 179/1125 on panic bars 50mm left
€80.21*
Prod.-Nr.: 991380
Bent mounting plate for Exit Control 179/1125 on panic bar 50 mm DIN right
€80.21*
Prod.-Nr.: 991381
Retrofitting of the GfS Exit Control 179/1125s for digital cylinder
€61.76*
Prod.-Nr.: 944500
Retrofitting of the GfS Exit Control 179/1125s for cylinders larger than 30 mm
€61.76*
Prod.-Nr.: 940500
GfS Exit Control 179/1125 Repair Set small
€31.89*
Prod.-Nr.: 888120
GfS Exit Control 179/1125 Large Repair Kit
€63.90*
Prod.-Nr.: 888130
Mounting Plate for GfS Exit Control 179/1125 with Cable Duct, 170 x 175 mm, RAL 6029
€107.93*
Prod.-Nr.: 991470K
Variants from €65.21*
Exit Control Accessories battery monitoring unit
€34.27*
Prod.-Nr.: 901800
automatic switch-off for GfS Door Guard
€66.40*
Prod.-Nr.: 901900





