GFS EH-Exit Control The GfS Exit Control 179/1125 secures the emergency exit and allows it to be opened with just a single hand movement. In the locked position, the GfS Exit Control 179/1125 secures the door handle; the door can be accessed in an emergency with a single opening movement. By pressing down the door handle, the GfS Exit Control 179/1125 moves vertically downward and releases the handle. At the same time, a continuous signal sounds. The continuous alarm can only be deactivated with the help of a key, and the door guard can be reset to its original position. For continuous passage operation, the system's permanent release is possible using the device key. The door can also be accessed without triggering an alarm using the key through the change function of the door lock. This means: The door can be opened with just one hand movement in case of danger, but the alarm signal alerts to unauthorized use. The threshold under the door handle is active.In an emergency, the door can be openedwith a single hand movement. When the door handle is pressed down,the Exit Control 179/1125 automatically moves downward. Theemergency exit door can now be accessed. Acontinuous alarm sounds, which can only be deactivatedby an authorized person using the device key. Authorized persons do not use the handle,but open the lock latch with the key,to access the door without triggering an alarm. With the device key, the door guard can bemoved downward into apermanent release position without triggering an alarm. In thisposition, the door can be accessed normally, e.g., for a longer goods transport. As soon as the door handle triggers the pre-alarm,an alarm is triggered. Releasing the handlesilences the alarm. However, if the userpresses the handle all the way down, itirreversibly triggers the main alarm and thedoor guard releases the handle. The basic functions of the EH wirelessdoor guard are the same as already described.It is used when the signal needs to be forwarded to an externalalarm system, whether at theporter's lodge, in the nurse's station, or the janitor's office.

for mounting on glass frame doors usable on right/left for short door plates How to measure: Distance from the center of the handle pin to the bottom edge of the door plate (less than 135 mm)

GfS SMARTDisplay for up to 8 devices 7-inch touch color display Graphical user interface User-supportive communication via display Door list with status display BUS for bi-directional communication Analog wiring with cable connection box for star wiring Integrated horn Housing for wall mounting (D x W x H) 43 x 230 x 153 mm